Get started →

Home / Guides / Ad viewability: what counts as viewable and how to improve it

● Yield

Ad viewability: what counts as viewable and how to improve it

Updated 16 November 2026 · 3 min read · By Arslan Mehdi

An ad that loads but is never seen isn't worth much to the advertiser. That's why buyers measure viewability, and why it affects how much they're willing to pay for your inventory. This guide explains the standard and what you can do about it.

What counts as viewable

The industry standard comes from the Media Rating Council (MRC), working with the IAB:

FormatViewable when
DisplayAt least 50% of the ad's pixels are on screen for at least 1 continuous second
VideoAt least 50% of the player's pixels are on screen for at least 2 continuous seconds of play

For very large display ads, a lower pixel threshold applies. Viewability rate is the share of measured impressions that met the standard.

Viewability rate = viewable impressions / measurable impressions x 100%

"Measurable" matters. Some impressions can't be measured, for example when the measurement script can't run. Those aren't counted either way.

Why buyers care

Many advertisers pay only for viewable impressions, or set minimum viewability targets for their campaigns. Their buying tools predict how likely an impression is to be seen, and bid accordingly. A slot with consistently low viewability attracts lower bids, and some buyers stop bidding on it entirely.

So viewability isn't just a report. It feeds directly into your eCPM.

What causes low viewability

  • Slots below where readers stop scrolling. The footer leaderboard on a page most people leave halfway down.
  • Ads loading too early. An ad requested when the page loads, but placed far down, may never come into view.
  • Fast scrolling past ads. Readers move past it in under a second.
  • Too many ads close together. Readers skim past ad-heavy blocks.
  • Slow loading. By the time the ad renders, the reader has moved on.

How to improve it

The aim is to place ads where people actually look, at the moment they look.

  1. Check scroll depth. Use your analytics to see how far readers typically scroll. Put fewer ads below that point.
  2. Lazy-load lower slots. Request ads shortly before they enter the screen, not at page load. This also helps page speed.
  3. Use in-content placements. Ads between paragraphs of an article are usually seen more than sidebar or footer slots.
  4. Consider a sticky unit. A well-behaved anchor ad that stays on screen tends to have high viewability. Follow the format rules and don't cover content.
  5. Remove dead slots. A slot that's rarely seen can drag down how buyers value the whole site. Removing it can lift average prices.
  6. Refresh carefully. If you refresh ads, only do it while the slot is in view, and follow Google's rules for refresh.

More layout detail is in ad layout best practices.

Don't chase 100%

Very high viewability usually means very few ads, or aggressive formats that annoy readers. Neither is good for revenue in the long run. The goal is a layout where most ads are genuinely seen, readers stay, and page speed holds up.

Also watch for viewability that looks too good. Bots that sit on a page can produce "viewable" impressions that no human ever saw. That's an invalid traffic problem, not a viewability win.

Measuring it properly

Google Ad Manager reports Active View metrics, which follow the same basic idea as the MRC standard. Look at viewability by ad unit and by device, not only as a site average. A good average can hide one slot that is almost never seen.

Some things to look at regularly:

  • Viewability by ad unit. Which slots consistently fall below the rest?
  • Mobile vs desktop. Layouts often behave very differently on each.
  • Viewability vs eCPM. Slots with higher viewability usually earn more per impression. If they don't, something else is going on.
  • Time on page. Pages people leave quickly will struggle on viewability whatever the layout.

Treat sudden jumps with as much suspicion as sudden drops. A slot that goes from average to near-perfect overnight is worth checking for unusual traffic.

Remember too that viewability numbers from different tools rarely match exactly. Ad Manager, a buyer's verification vendor and your own analytics each measure in slightly different ways. Use one source consistently to track trends, and treat small differences between tools as normal rather than as a problem to chase.

Want help with placements? Layout and viewability tuning is part of the ad operations Bidora handles for the sites we manage. Talk to us about joining Bidora MCM.

Ready when you are

Tell us about your site. We'll take it from there.