Get started →

Home / Guides / eCPM and RPM explained: the two numbers publishers mix up

● Yield

eCPM and RPM explained: the two numbers publishers mix up

Updated 16 November 2026 · 3 min read · By Arslan Mehdi

eCPM and RPM both describe ad earnings "per thousand", so they're easy to confuse. They answer different questions, though, and using the wrong one can lead you to the wrong decision. Here's what each means, with formulas you can check yourself.

eCPM: earnings per thousand impressions

eCPM stands for effective cost per mille, where "mille" means a thousand. It tells you how much you earn for every 1,000 ad impressions served.

eCPM = (ad revenue / ad impressions) x 1,000

Example: you earn 120 from 80,000 impressions.

eCPM = (120 / 80,000) x 1,000 = 1.50

eCPM is useful for comparing demand sources, ad units and sizes. If one slot earns a 2.10 eCPM and another earns 0.40, that tells you something about how buyers value them.

RPM: earnings per thousand pages or sessions

RPM, revenue per mille, measures earnings per 1,000 page views (page RPM) or per 1,000 sessions (session RPM). It looks at revenue from the reader's side, not the ad's.

Page RPM    = (ad revenue / page views) x 1,000
Session RPM = (ad revenue / sessions)   x 1,000

Example: the same 120 came from 20,000 page views across 12,000 sessions.

Page RPM    = (120 / 20,000) x 1,000 = 6.00
Session RPM = (120 / 12,000) x 1,000 = 10.00

Why the numbers differ

The link between them is how many ads each page shows. In the example, 80,000 impressions over 20,000 page views is four impressions per page.

Page RPM = eCPM x impressions per page
6.00     = 1.50 x 4

This is why eCPM alone can mislead. Add more ad slots and eCPM often falls, because the extra slots are usually lower on the page and less valuable. But page RPM can still rise, because each page now earns more in total. The reverse is also true: removing weak slots can lift eCPM while page RPM drops.

Which number to use

QuestionBest metric
Which demand partner pays more per ad?eCPM
Which ad unit or size is most valuable?eCPM, with viewability alongside
Did a layout change make the site earn more?Page RPM or session RPM
How much is a visitor worth to the business?Session RPM
Is a traffic source worth paying for?Session RPM, net of invalid traffic

For most decisions about the site as a whole, RPM is the more honest number. It accounts for how many ads you show and how readers move through the site.

Traps to avoid

  • Comparing eCPM across different layouts. More slots usually means lower eCPM. That isn't necessarily bad.
  • Ignoring fill. eCPM is often calculated on filled impressions only. If fill rate drops, eCPM can look great while revenue falls.
  • Mixing currencies or time zones. Make sure revenue and traffic numbers cover the same period in the same time zone.
  • Counting invalid traffic. Bot page views inflate the denominator and make RPM look worse, or, before deductions, revenue look better than it will be. See invalid traffic explained.
  • Reading one day. Prices move daily. Use weeks, and compare like with like, for example this Tuesday against last Tuesday.

What actually moves RPM

RPM rises when readers see more valuable ads without leaving sooner. The usual levers are:

  • More competition for each impression, through header bidding and Ad Exchange.
  • Sensible floors that stop impressions going too cheaply.
  • Placements readers actually see, which raises viewability and bids.
  • Pages that load fast and keep people reading.

A worked comparison

Say you test two layouts on the same site, each for two weeks with similar traffic.

Layout ALayout B
Ad impressions per page35
eCPM2.001.50
Page RPM6.007.50
Pages per session2.01.6
Session RPM12.0012.00

These are made-up numbers to show the logic. Layout B looks worse on eCPM and better on page RPM. But readers view fewer pages per visit, so session RPM is exactly the same. Layout B shows more ads for no extra money, and probably makes the site feel heavier. Layout A wins.

That's why we look at session RPM before declaring any layout change a success.

Want reports that show RPM by site, country and device? That's the reporting Bidora provides for the sites we manage. Talk to us about joining Bidora MCM.

Ready when you are

Tell us about your site. We'll take it from there.